Marantz SR7013 vs Marantz SR6012

Here we are comparing Marantz SR7013 to Marantz SR6012 to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. Both receivers have 9 channel amplifiers with Marantz SR7013's being more powerful.

Marantz SR7013	Marantz SR6012
Marantz SR7013 was introduced in 2018. It is equipped with 9 channel amplifier with 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos, DTS:X and Auro-3D, passes 4K/60Hz and upscales up to 4K 50/60Hz 4:4:4 video signal.	Marantz SR6012 was introduced in 2017. It is equipped with 9 channel amplifier with 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.2 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales up to 4K 50/60Hz 4:4:4 video signal.

We evaluated Marantz SR7013 and Marantz SR6012 and gave them scores of 93 and 91 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Marantz SR7013 over Marantz SR6012.

	Marantz SR7013	vs	Marantz SR6012
Higher Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
IMAX Enhanced		vs
Auro 3D with Auro-Matic Upmixer	Built-In	vs
Bass Sync		vs
More Component Video Inputs	3	vs	2
More Zones	3	vs	2
More Powered Zones	2 and 3	vs	2
Zone 2 Outs	HDMI, Component, Composite, Pre Out	vs	HDMI, Pre Out
+12V Trigger Output	2	vs	1
Web Control		vs
Display	2 lines + port hole	vs	port hole
Pre-programmed / Learnable / LCD Display	/ /	vs	/ /
Bigger Power Supply	710 W	vs	680 W
Higher Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	125 W (0.05% THD)	vs	110 W (0.08% THD)
Higher Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	165 W (0.7% THD)	vs	150 W (0.7% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	235 W (10% THD)	vs	220 W (10% THD)
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	200 W (1% THD)	vs	185 W (1% THD)

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Marantz SR7013	Marantz SR6012
High Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Channel Processing	11.2	11.2
Dolby Atmos	up to 7.1.4 with external amp	up to 7.1.4 with external amp
DTS:X	up to 7.1.4 with external amp	up to 7.1.4 with external amp
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32	Audyssey MultEQ XT32
HDR10
Dolby Vision
eARC
New HDCP Version	2.2	2.2
Analog To HDMI Upconversion	Component**, Composite	Component**, Composite
Wi-Fi
Bluetooth	SBC	SBC
Works with Amazon Alexa
HEOS
Many HDMI Inputs	8 (1 front)	8 (1 front)
Many HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (2 for MAIN, 1 for ZONE2)
USB Input	1 (Front) for USB memory	1 (Front) for USB memory
Many RCA Line Inputs	6 (1 front)	6 (1 front)
Phono Input
Multi-Channel Input	7.1	7.1
RCA Pre-Outs	11.2	11.2
Composite Video Inputs	4 (1 front)	4 (1 front)
Component Video Inputs	3	2
Ethernet
Analog Tuner	FM/AM	FM/AM
Pandora
Spotify
Tidal

WEAKNESSES	Marantz SR7013	Marantz SR6012
No Front Wide Channel Support
No Dolby Atmos Height Virtualization
No HDR10+
No 8K Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Few 8K Inputs
No Digital Radio
Old Bluetooth Version	3․0 + EDR	3․0 + EDR

Marantz SR7013	Marantz SR6012
9 channel Amplifier: Marantz SR7013 features 9 channel power amplifier. It is rated at 125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	9 channel Amplifier: Marantz SR6012 features 9 channel power amplifier. It is rated at 110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Current Feedback Topology: Marantz SR7013 and Marantz SR6012 feature Current Feedback Topology which is a well known, Marantz’ original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.
• HDAM (Hyper Dynamic Amplifier Module): Marantz SR7013 and Marantz SR6012 feature exclusive Marantz HDAM (Hyper Dynamic Amplifier Module) technology found on their Reference Series components. Marantz developed its own discrete circuit boards to replace standard IC's. These HDAM's consist of discrete surface mount components with short mirror image L/R signal paths. Those devices are doing exactly the same thing as the Op-Amps, but outperform the regular IC Op-amps dramatically in terms of the Slew Rate and reduced noise level, resulting in a much more dynamic, accurate and detailed sound. Over the years Marantz developed different types of the HDAM to improve quality and to fit to the special requirements of a product category like CD or amplifier.

AMPLIFIER	Marantz SR7013	Marantz SR6012
Channels	9.2	9.2
Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Current Feedback Topology
Discrete Amplification
HDAM
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable	assignable

Marantz SR7013's and Marantz SR6012's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Marantz SR7013: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Marantz SR6012: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Marantz SR7013: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Marantz SR6012: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Marantz SR7013: 5.2, 7.2 with internal amplifier.
Marantz SR6012: 5.2, 7.2 with internal amplifier.
• 2-ch Bi-Amp: Both models are able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Marantz SR7013 and Marantz SR6012 support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.

DTS:X

Marantz SR7013 and Marantz SR6012 support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Both models feature DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

Auro-3D

Marantz SR7013 supports Auro-3D.

• Auro-Matic upmixer: Auro-Matic upmixer takes non Auro-3D sound and upmixes to the current speaker configuration.

IMAX Enhanced

Marantz SR7013 is IMAX Enhanced certified. To qualify for IMAX Enhanced certification, 4K HDR televisions, projectors, sound bars, a/v receivers, loudspeakers, powered subwoofers and other premium home entertainment devices must meet carefully prescribed performance requirements established by IMAX, DTS and Hollywood's leading experts.

• What makes an IMAX Enhanced A/V receiver different from an A/V receiver with DTS:X technology? DTS:X technology is commonly found in most multi-channel A/V receivers on the market today. All IMAX Enhanced A/V receivers include DTS:X technology and deliver additional features, such as auto-sensing of IMAX Enhanced content, via IMAX Mode. IMAX Mode indicates that your A/V receiver supports fully immersive IMAX signature sound.

AUDIO DECODING	Marantz SR7013	Marantz SR6012
Dolby Atmos	up to 7.1.4 with external amp	up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
Surround EX
DTS:X	up to 7.1.4 with external amp	up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	Built-In

Marantz SR7013 and Marantz SR6012 come with 8 HDMI inputs. It has 3 outputs - 2 for MAIN and 1 for ZONE2.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K 50/60Hz 4:4:4 video signal.
• 4K Upscaling: Both receivers can upscale up to 4K 50/60Hz 4:4:4 from HDMI and analog sources.
• Analog To HDMI Upconversion: Both receivers support analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.2 Copy Protection: Both receivers are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Marantz SR7013 and Marantz SR6012 support Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

VIDEO FEATURES	Marantz SR7013	Marantz SR6012
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4

TERMINALS	Marantz SR7013	Marantz SR6012
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (2 for MAIN, 1 for ZONE2)
8K Inputs
USB Input	1 (Front) for USB memory	1 (Front) for USB memory
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	6 (1 front)	6 (1 front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input	7.1	7.1
RCA Pre-Outs	11.2	11.2
XLR Pre-outs
Composite Video Inputs	4 (1 front)	4 (1 front)
Composite Video Outputs	1	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	3	2
Component Video Outputs	1	1

GENERAL	Marantz SR7013	Marantz SR6012
Brand	Marantz	Marantz
Model	SR7013	SR6012
Type	A/V Receiver	A/V Receiver
Country	USA	USA
Release Year	2018	2017
Predecessor	Marantz SR7012	Marantz SR6011
Successor	Marantz SR7015	Marantz SR6013

AMPLIFIER	Marantz SR7013	Marantz SR6012
Channels	9.2	9.2
Power Output	125 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	110 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Current Feedback Topology
Discrete Amplification
HDAM
THX™ Certification
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability	assignable	assignable

AUDIO FEATURES	Marantz SR7013	Marantz SR6012
DAC	AKM AK4458	AKM AK4458
DAC Specs	192 kHz/32 Bit	768 kHz/32 Bit
Maximum Channel Processing	11.2	11.2
Air Studios Monitor Certification
Dolby Atmos	up to 7.1.4 with external amp	up to 7.1.4 with external amp
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
Surround EX
DTS:X	up to 7.1.4 with external amp	up to 7.1.4 with external amp
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES	Discrete 6.1, Matrix 6.1	Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer	Built-In
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD	MP3, WMA, MPEG-4 AAC, Apple Lossless, WAV, FLAC, DSD
Music Playback via USB	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD	MP3, WMA, AAC, Apple Lossless, WAV, FLAC, DSD
High Resolution Music Playback via USB and/or Network	up to 192 kHz	up to 192 kHz
High Resolution Audio Formats via USB	Apple Lossless, WAV, FLAC, DSD	Apple Lossless, WAV, FLAC, DSD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction		Hybrid PLL Clock Jitter Reducer
DTS Dialogue Control
Dialog Enhancement
Dialog Level Adjustment
Dialog normalization
Dialogue Lift
Compressed Music Enhancer	MDAX2	MDAX2
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Direct Mode
Pure Direct Mode
Independent Subwoofer Outputs

CALIBRATION	Marantz SR7013	Marantz SR6012
Auto Speaker Calibration System with Mic.	Audyssey MultEQ XT32	Audyssey MultEQ XT32
Audyssey App Support
Optimized Bass Redirection
Bass Sync

VIDEO FEATURES	Marantz SR7013	Marantz SR6012
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)
HDCP Version	2.2	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Video Signal Upscaling	up to 4K 50/60Hz 4:4:4	up to 4K 50/60Hz 4:4:4
Analog To HDMI Upconversion	Component**, Composite	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
isf Certified Calibration Control

CONNECTIVITY	Marantz SR7013	Marantz SR6012
Wi-Fi
Bluetooth	SBC	SBC
Works with Amazon Alexa
Chromecast Built-In
Works with SonoS
HEOS
DTS Play-Fi
MHL Input
DLNA 1.5
Domotz Pro Compatible
Remote Monitoring with ihiji
OvrC Compatible
AirPlay	AirPlay 2	AirPlay 2
Apple Product Connection	iPod, iPhone and iPad	iPod, iPhone and iPad
Remote App	Marantz 2016 AVR Remote App for iOS and Android devices	Marantz 2016 AVR Remote App for iOS and Android devices
InstaPrevue Input Source Prevue

TERMINALS	Marantz SR7013	Marantz SR6012
HDMI Inputs	8 (1 front)	8 (1 front)
HDMI Outputs	3 (2 for MAIN, 1 for ZONE2)	3 (2 for MAIN, 1 for ZONE2)
8K Inputs
USB Input	1 (Front) for USB memory	1 (Front) for USB memory
USB DC Out Port
Optical Inputs	2	2
Optical Outputs
Coaxial Inputs	2	2
RCA Line Inputs	6 (1 front)	6 (1 front)
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input	7.1	7.1
RCA Pre-Outs	11.2	11.2
XLR Pre-outs
Composite Video Inputs	4 (1 front)	4 (1 front)
Composite Video Outputs	1	1
S-Video Inputs
S-Video Outputs
Component Video Inputs	3	2
Component Video Outputs	1	1
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI, USB, Composite, L/R Audio	HDMI, USB, Composite, L/R Audio
Speaker A/B	assignable	assignable
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
Flasher In
Remote Control In/Out	1 / 1	1 / 1

ZONES	Marantz SR7013	Marantz SR6012
Number of Zones	3	2
Powered Zones	2 and 3	2
Zone 2 Outs	HDMI, Component, Composite, Pre Out	HDMI, Pre Out
Zone 3 Outs	Pre Out
RS-232C Interface
+12V Trigger Output	2	1

MISCELLANEOUS	Marantz SR7013	Marantz SR6012
On-Screen Display	Advanced Graphic User Interface	Advanced Graphic User Interface
GUI Languages	3	3
Web Control
IP Control
Display	2 lines + port hole	port hole
Remote Controller	RC036SR	RC035SR
Pre-programmed / Learnable / LCD Display	/ /	/ /
Setup Assistant

RADIO	Marantz SR7013	Marantz SR6012
Analog Tuner	FM/AM	FM/AM
Digital Radio
Internet Radio	TuneIn	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Marantz SR7013	Marantz SR6012
Front Panel	Metal	Metal
Speaker Terminals	11	11
Large Speaker Terminals	11	11
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
High Grade Audio Components
Gold plated RCA terminals

POWER	Marantz SR7013	Marantz SR6012
Power Supply	AC 120 V, 60 Hz	AC 120 V, 60 Hz
Toroidal Transformer	(EI)	(EI)
Power Consumption	710 W	680 W
No Sound Power	ECO On/Off: 65 W/110 W	ECO On/Off: 60 W/100 W
Standby Power	0.2 W	0.2 W
ECO Mode / Hybrid Standby Function
Auto Power off

PHYSICAL	Marantz SR7013	Marantz SR6012
Dimensions (W x H x D)	440 mm x 185 mm x 411 mm (with antenna: 440 mm x 247 mm x 411 mm) 17-3/8" x 7-3/8" x 16-1/4" (with antenna: 17-3/8" x 9-3/4" x 16-1/4"	440 mm x 161 mm x 398 mm (with antenna: 440 mm x 229 mm x 398 mm) 17-3/8" x 6-3/8" x 15-3/4" (with antenna: 17-3/8" x 9-1/8" x 15-3/4")
Weight	14.2 kg (31 lbs 5 oz)	12.8 kg (28 lbs 4 oz)

SPECIFICATIONS	Marantz SR7013	Marantz SR6012
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	125 W (0.05% THD)	110 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 2 channel driven, FTC)	165 W (0.7% THD)	150 W (0.7% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	235 W (10% THD)	220 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)	200 W (1% THD)	185 W (1% THD)
THD (Digital)	0.008% (1 kHz, at 0 dB)	0.008% (1 kHz, at 0 dB)
Analog Distortion	0.005% (20 Hz-20 kHz, Direct mode)	0.005% (20 Hz-20 kHz, Direct mode)
Phono Distortion	0.03% (1 kHz, 3 V)	0.03% (1 kHz, 3 V)
Input Sensitivity and Impedance (Line)	200 mV/47 kΩ	200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)	2.5 mV	2.5 mV
Rated Output digital	2 V (at 0 dB playback)	2 V (at 0 dB playback)
S/N Ratio (Line, IHF-A)	100 dB	100 dB
S/N Ratio (Phono MM, IHF-A)	74 dB	74 dB
S/N Ratio (digital)	102 dB	102 dB
Dynamic Range (digital)	100 dB	100 dB
Phono RIAA Deviation	±1 dB (20 Hz to 20 kHz)	±1 dB (20 Hz to 20 kHz)
Frequency Response (Analog In)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)	+1/-3 dB (10 Hz to 100 kHz, Direct mode)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	5.6 MHz, 2.8 MHz	5.6 MHz, 2.8 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Video Frequency Response	5 Hz - 60 MHz, 0, -3 dB (Component) 5 Hz - 10 MHz, 0, -3 dB (Composite)	5 Hz - 60 MHz, 0, -3 dB (Component) 5 Hz - 10 MHz, 0, -3 dB (Composite)
Ethernet Standard	100BASE-TX	100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz	5 GHz, 2.4 GHz
Bluetooth Version	3․0 + EDR	3․0 + EDR
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	USB2.0 5V, 1 A	USB2.0 5V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz	87.5 MHz - 107.9 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)	Mono: 2.8 µV (20.2 dBf)	Mono: 2.8 µV (20.2 dBf)
FM Effective Sensitivity	1.2 µV (12.8 dBf)	1.2 µV (12.8 dBf)
FM S/N Ratio	Mono/Stereo: 70 dB/67 dB	Mono/Stereo: 70 dB/67 dB
FM Harmonic Distortion (IHF, 1 kHz)	Mono/Stereo: 0.7%/1.0%	Mono/Stereo: 0.7%/1.0%
AM Frequency	520 kHz - 1710 kHz	520 kHz - 1710 kHz
AM Effective Sensitivity	18 µV	18 µV
Warranty	3 Years	3 Years

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted